Instruction manual

Instruction Manual

Introduction

Packaging Contents

• 1 x USB 3.0 to 2.5” SATA III Enclosure w/ Encryption

• 1 x USB 3.0 Cable

• 1 x Drive case

• 1 x Drive installation screws

• 1 x Mini screw driver

• 1 x Instruction manual

Note: It is recommended that the contents of this enclosure be regularly backed-up,

as lost passwords or hardware failure (SATA drive or enclosure) will result in the stored

data being unrecoverable.

System Requirements

• Computer system with available USB port

• 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)

Warning: To use AES encryption, the SATA drive must be initialized and formatted after

setup. This will erase all data on the drive.