Instruction manual
Instruction Manual
5
How to Use
Initial Setup
1. When connected to a host computer for the rst time, the OLED readout will
prompt you to setup a password or not. If no password is used, the enclosure will
function as a standard external hard drive enclosure without any encryption.
2. If you have chosen to use a password you will receive a prompt informing you it will
be impossible to recover data without your password. Select “Yes” to continue.
3. After you have selected the option to continue to use a password, you will be
prompted to enter a 4 ~ 8 digit password. Press <Enter> when complete.
WARNGING: If the password is lost, the data on the drive will not be recoverable.
4. Re-enter the password as conrmation and press <Enter>.
The new HDD is connected. Will
you use Passwords? Yes/No
It is impossible to recovery any
data in the HDD after initialization.
Do you want to continue? Yes/No
Enter a password rst time
****
Re-enter your password
****