Operating Instructions and Installation Instructions

STEP #1 - UNPACK AND ASSEMBLE MAIN FRAME:
1. Remove and unwrap all product from shipping boxes. Lay all parts out in a clean open area to prepare for assembly.
2. Locate the FRONT FRAME, MAIN FRAME, and REAR FRAME as shown below.
3. Slide FRONT FRAME into MAIN FRAME. Loosely Install three (M8 X 25MM, BUTTON HEAD BOLTS), and three
(M8, FLAT WASHERS) do not tighten at this time.
4. Slide REAR FRAME into MAIN FRAME. Loosely Install three (M8 X 25MM, BUTTON HEAD BOLTS), and three
(M8, FLAT WASHERS) do not tighten at this time.
Page 12
STEP #1 Completed