Product Model # SAA-110T Item # 9001081 High Pressure Air Tank OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Table Of Contents..................................................................................................................... 2 Safety Information.................................................................................................................... 2-3 Overview.................................................................................................................................... 4 Operating Instructions.....................................................
SAFETY INFORMATION Before Operating 1. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. 2. Before operating your Air Tank, check for damaged parts. 3. Do not exceed the maximum PSI air pressure. 4. Use compressed air only. 5. When filling the tank, do not over-pressurize. 6. Do not over inflate. Never exceed the maximum pressure rating of any inflatable. Check pressure frequently during inflation.
OVERVIEW Handle Grip Tool Gauge Tank Gauge Safety Valve Quick Coupler (4pcs) Pressure Regulator Air Cock (4pcs) Quick Coupler Tank DrainTank Product Specifications 9001081 10 U.S.Gallons (38L) 225PSI 40.8 lbs (18.5kg) PRODUCT NUMBER TANK SIZE(TOTAL) MAXIMUM WEIGHT • This product has been shipped completely assembled.When unpacking inspect the air tank carefully to make sure no breakage or damage occured during shipping.
OPERATION INSTRUCTIONS 1. To check the safety valve Before using this tank, pull the ring on the safety valve to make sure that the safety valve operates smoothly (Fig 1). Do not use air tank if the safety valve is stuck or does not operate smoothly. Safety Valve Fig 1 WARNING: Risk of bursting if the safety valve does not work properly, over-pressurization may occur, causing air tank rupture or an explosion. 2.
OPERATION INSTRUCTIONS WARNING: Do not use tank for the storage of compressed gases other than air. If the tank has changed shape in any way, discontinue use immediately. CAUTION: Replace fittings if leaking or physically damaged in any way. CAUTION: Always drain tank pressure completely before attempting to remove or replace any of the fittings. 1. Connecting (1) Close the air cock (Fig 2). (2) Connect the tank by connecting the air hose to one of the four quick couplers on the tank.
OPERATION INSTRUCTIONS 2. Adjustment of outlet pressure Adjust the outlet pressure to the required level by turning the knob of the pressure regulator clockwise to increase the outlet pressure and counterclockwise to decrease it. Tool gauge is provided to show when the required pressure is reached. When adjusting the pressure, check and make sure that tank gauge for the tank. Tank has the pressure level that is higher than that of the pressure to be adjusted.
MAINTENANCE Procedure for draining condensation from tank: 1. Regularly drain water condensation from tank, which can lead to internal corrosion and damage to the tank. To drain, keep all air cocks to the "OFF" position (Fig 5). 2. Turn air pressure regulator knob counter-clockwise to set the outlet pressure to zero (Fig 5). 3. Completely release the air in the tank through the air hose connected to the air tank. 4. Place suitable container under unit to catch water. 5.
STEALTH WARRANTY LIMITED 1YR WARRANTY Warranty covers any defects in materials or workmanship of the enclosed product. Alton Industry Ltd. Group will repair or replace any defective materials due to craftsmanship of the product. THIS WARRANTY DOES NOT COVER ANY PROBLEM CAUSED BY MISUSE, ABUSE, ACCIDENTS OR ACTS OF GOD, SUCH AS FLOODS OR HURRICANES. CONSEQUENTIAL AND INCIDENTAL DAMAGES ARE NOT COVERED UNDER THIS WARRANTY. HUMAN DAMAGE AND DISASSEMBLY WILL NOT BE COVERED BY THE WARRANTY.
