User manual

3
730.927 | 09.10
1. About these instructions
These operating instructions are part of the product.
Read these operating instructions carefully before use,
keep them over the entire lifetime of the product,
and pass them on to any future owner or user of this product.
1.1 Applicability
This manual describes the installation, function, operation and maintenance of
the solar charge controller.
Further technical information is provided in a separate technical manual.
1.2 Users
These operating instructions are intended for end customers. A technical expert
must be consulted in cases of uncertainty.
1.3. Description of symbols
Safety instructions are identified as follows:
SIGNAL WORD
Type, source and consequences of the danger!
Measures for avoiding danger
Instructions relating to the functional safety of the system are in bold type.
2. Safety
2.1 Proper usage
The solar charge controller may only be used in PV systems for charging and
controlling lead-acid batteries with liquid or solid electrolyte in accordance
with these operating instructions and the charging specifications of the battery
manufacturer.
2.2 Improper usage
No energy source other than a solar generator may be connected to the solar
charge controller. No mains devices, diesel generators or wind generators may
be connected.
Do not connect any defective or damaged measuring equipment.



