User manual

Displaying yields numerically (list) and graphically (chart)
✔
The status display is shown.
1. Press
‘SET’ . The main menu is displayed with ‘Yield’ selected.
2. Press
‘SET’ . The list with yield time periods is shown.
3.
Press rs to select a yield time period.
4. Press ‘SET’ . The individual yields for the yield time period are
shown in a list (Fig. left).
5.
Press rs to select an individual yield value.
6. Press
‘SET’ . The selected individual yield is shown in a chart
(Fig. left).
7.
Press rs to page through the charts.
8. Press
‘SET’ to return to the list.
Editing selection lists containing check boxes
✔
A selection list with check boxes is displayed (Fig. left).
1.
Press rs to select a check box.
2. Press
‘SET’ . The state of the check box changes from on to off
and vice-versa (preset check boxes cannot be changed).
3. Repeat steps 1 and 2 for further check boxes as required.
4. Press
‘ESC’ . The changes are adopted and the next higher
menu level is displayed.
Editing selection lists containing radio buttons
✔
A selection list with radio buttons is displayed (Fig. left).
1.
Press rs to select a radio button that is currently switched
off.
2. Press
‘SET’ . The selected radio button is switched on and the
previously switched on radio button is switched off.
3. Press
‘ESC’ . The changes are adopted and the next higher
menu level is displayed.
Changing numeric settings
✔
A numeric setting is displayed (example
Date in Fig. left).
1. Press SET. The selected value flashes (
Day in Fig. left).
2.
Press rs to change the value.
3. Press SET. The change is adopted (value no longer flashes)
or
Press ESC to cancel the change (value no longer flashes).
GB
747.431 | Z08 | 2014-01-31
117