User manual

5.4.1 Registration

Call up the Internet portal, enter the language and serial number

1. Enter the following address into the Internet browser (or click the address if you are reading

this document as a PDF on a computer monitor): www.steca.com/portal. Ensure that

scripting and cookies for www.steca.com/portal

are enabled in the browser.

Fig. 10 appears.

Fig. 10: Language selection and data entry form for the serial number

2. Select your language using the buttons ① (in Fig. 10

). The language is set immediately.

3. Enter the serial number of the device into the field ②.

Notice

–

The serial number always consists of a sequence with 6 numbers – 2 letters – 12 num-

bers , e. g. 123456AB123456789012.

–

If you enter an invalid serial number, an error message is displayed and the login

process is cancelled.

–

Press the green button

"+"

(at the left next to the field ②), to enter the serial numbers

of further inverters (a maximum of 5 inverters are possible).

4. After entering the last serial number, press the button ③.

Fig. 11, p.

120 appears.

747.431 | Z08 | 2014-01-31

119