User manual

3.2 Operating buttons
The operating buttons (④ in
Ä 3.1, p. 86 ) have the following functions:
Button Action
Function
General Guided configuration process
‘ESC’
press briefly jumps up by one menu level navigates 1 step back
discards any changes
press longer
(≥ 1 second)
jumps to status display jumps to the start of the guided
configuration process
r
press briefly
n moves the selection bar or the display content upwards
n when performing numerical settings, moves the selection 1 posi-
tion to the left
n increases the setting value by 1 step
s
press briefly
n moves the selection bar or the display content downwards
n when performing numerical settings, moves the selection 1 posi-
tion to the right
n decreases the setting value by 1 step
‘SET’
press briefly jumps down by one menu level —
n a selected numerical value starts flashing and can be changed
n adopts a change
n changes the state of a control element (check box/radio button)
press longer
(≥ 1 second)
answers a query dialog with
Yes .
navigates 1 step forward
3.3 Display
3.3.1
General information
For information shown in the display (② in Ä 3.1, p. 86 ) the following generally applies:
n Symbol
: The inverter is processing large amounts of data and is not able to process any user
input at this time. The resulting waiting time is indicated by the animated sun symbol.
n Errors are indicated by a red flashing backlighting. An event message is also displayed at the
same time.
Note
The display reacts slower at very low temperatures. This is especially applicable to coolcept-x
devices that are used outdoors.
3.3.2 Information
The information shown on the display is described below using illustrative examples.
GB
747.431 | Z08 | 2014-01-31
88