User manual

Status display
The status display shows the following values:
3
4
2
2
7 8
9
5 6
1
F
①
Measurement name
②
Measurement with units
③
Date
④
Symbol
Non-confirmed event messages ; more information
on this is provided in Section
Ä 7, p. 128 .
⑤
Animated Connect symbol with 2‑digit inverter address;
indicates data traffic on the RS485 bus.
⑥
Symbol Derating
⑦
Symbol
Fixed voltage mode activated
⑧
Time
⑨
IP address of the device when a network connection has
been established, display alternates with ③ – ⑦
The following applies to the status display:
n The measurements shown in the status display are defined
under Settings ▶ Meas. values. Some measurements are
always displayed (default setting).
n Current values are not displayed at night (solar irradiation too
low; example in Fig. left).
n The CO2 saving shown in the status display are calculated
using the savings factor
508 g/kWh .
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a list.
①
Yield period (day/month/year)
②
Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: Last 31 days
1)
Monthly yield: Last 13 months
1)
Annual yield: Last 30 years
1)
1)
A yield value of 0 is shown when the inverter was not yet
installed at that time.
GB
747.431 | Z08 | 2014-01-31
89