Manual

• Whenthedualvoltagegeneratorexceedsorisbelowtheselevels,thenthe

circuitbreakershouldbeinthe"OFF"position.Ifnotboththegeneratorandthe

devicespoweredbyitcanbedamaged.

• Alwaysconnectdevicestothegeneratorwiththehighestdemanddevice

firstandthenthelesserdemanddevicesafterward.If theoperation

becomesoverloaded,thegeneratorenginewilllagorstopsuddenly.Ifthis

happens,unplugalldevicesimmediately,turnoffthemainswitchonthe

generatorandcheckallsystems.

• Threephasegenerators

• Makecertainthatyoubalanceallthreephasesduringoperation.Stop

theengineandchecktoseeifthegeneratingisoperatingwithin20%of

specification.Iftheengineisnot,reduceyourloadorturnoffthe

generator.

• Thesumoftheloadforeachphasemustbebelowtheoverallrated

load.Inaddition,theoverallcurrentdrawnmustbelessthantheoverall

ratedcurrent.

• ThephasearrangementA,B,C,D(orU,V,W,N)shouldbefromleft-

to-rightorclockwise.

• Ifyouareattemptingtostartthreenon-synchronousmotors,always

startwiththeheaviestdutymotorfirstandthenprogresstothelighter

dutyunits.

Note:Ifoverloadingthecircuittripsthecircuitbreaker,reducetheelectricalload

onthecircuitandthenwaitafewminutesbeforeresumingoperation.

6.2 DC application

1. The DC terminals are only for charging the 12V battery included with your

generator.

2. Set the circuit breaker in the "OFF" position while charging the battery. On the

12V output terminals, a charge switch can be installed so that the unit can

be turned on and off as desired.

3. If your generator has an automatic battery with separate leads, make certain

that you disconnect the negative lead while you are charging the battery.