Manual

Checkfor damagedparts.Beforeusingthegenerator,anypartthat appearsdamagedshouldbecarefully
checkedto determinethat it will operateproperlyandperformits intendedfunction.Checkfor alignmentand
bindingof movingparts,anybrokenpartsor mountingfixtures,andanyotherconditionthat mayaffect
properoperationtechnician.
Thegeneratoris designedwith guardsfor protectionfrom movingparts.In anycase,caremuststill betaken
to protectpersonnelandequipmentfrom othermechanicalhazardswhenworkingaroundthe generator.
Donot operatethegeneratorwith safetyguardsremoved.Whilethe generatoris running,do notattemptto
reacharoundthesafetyguardfor maintenanceor anyotherreason.
Keephands,arms,long hair,looseclothing,andjewelryawayfrom movingparts.Beawarethatwhenengine
partsaremovingfasttheycannotbeseenclearly.
Keepaccessdoorsonenclosuresclosedandlockedwhenaccessis not required.
Whenworkingonor aroundthe generatoralwayswearprotectiveclothingincludingANSIapprovedsafety
gloves,safetyeyegoggles,andsafetyhat.
Donot alteror adjustanypartof thegeneratorthat is assembledandsuppliedbythe manufacturer.
Alwaysfollow andcompletescheduledengineand generatormaintenance.
Chemicals
Avoid contact with hot fuel, oil, exhaust fumes, and hot solid surfaces.
Avoid body contact with fuels, oils, and lubricants used in the generator. If swallowed, seek medical
treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with
soap and water. For eye contact, immediately flush eyes with clean water and seek medical attention.
Noise
Prolonged exposure to noise levels above 85 DBA is hazardous to hearing. Always wear ANSI approved ear
protection when operating or working around the generator when it is running.
Extension Cord
If an extension cord (not included) is used, make sure to use only UL approved cords having the correct
gauge and length according to the following table:
Nameplate Amps _ Cord Lengths_
(@full load) 0'-50' 20'-100' 100'-150' 150'-200'
O- 5 16AWG 16AWG 12AWG 12AWG
5.1 - 8 16AWG 14AWG 10AWG
8.8 - 12 14AWG 12AWG