Manual

Ma.ua]
Battery
Assembly
To start generator with electric start you will need a battery (not included). You can use a 12v lawn
tractor battery with the following specifications:The dimensions are Wx7.5" Dx5" Hx7"(including
terminals). A rated cranking amperage of 200. Terminals are regular, not reversed. Note: Using a
battery not designed for this unit may void warranty. Also this generator can also be started with
the pull start.
Photos below demonstrate how to install the battery.
1) Screw of the IVI6x12 bolts as shown below.
Open up the plate
Connect battery and put in the cabin
2) Screw on one bolt to rivet the battery and screw the bolts to close up the plate as shown below.
Rivet battery Close up the plate