User's Manual

10
CONVENIENCE AND SAFETY FEATURES
AUTO LOCK / UNLOCK (Option # 2)
The Auto Lock feature controls whether the doors will automatically lock/unlock on your vehicle when driving or with
turning the Ignition ON/OFF. If the Auto Lock feature is turned on, and your system is in “Tach” mode, then the
doors should automatically lock as the engine RPM’s increase (driving). If the Auto Lock feature is turned on, and
your system is in “Smart Tachless” mode, then the doors will lock a few seconds after the Ignition is turned on.
When the Auto Lock feature is turned on, the system will always unlock the doors when the Ignition is turned off.
With this feature turned OFF, the system will not automatically lock or unlock the vehicle. See your installer for
programming information on this feature.
HORN CHIRPS (Option # 7 & 16)
If vehicle horns are connected to the system, they will provide audible confirmation chirps for remote start. The chirp
sound can be programmed from short to long to adjust for different sounding horns. Note: Horn honk/chirp feature
may require extra labor and/or parts to install.
Option 7 = Chirps with Remote Start On/Off.
Option 16 = Short, medium or long Chirp Pulse (15, 20 or 40 milliseconds).
VALET MODE (Requires Installation of Valet Switch)
Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into Valet Mode.
The remote start function WILL NOT operate when in Valet Mode. To enter Valet mode, turn the key to the ON
position, press and hold Program/Valet switch for 5-6 seconds. The LED will turn on solid when the system is in
Valet Mode. To exit Valet Mode, perform this procedure again.
ANTI-GRIND (Optional, relay not included)
This Optional feature prevents the user from accidentally grinding the starter if the Ignition key is turned too far to
the start position while engine is already running from the remote starter. The Anti-Grind requires the use of an
external relay.