User's Manual

CONVENIENCE AND SAFETY FEATURES

HOOD OPEN SAFETY (Requires hood pin switch)

Prevents the engine from being Remote Started when hood is open. Eliminates risk of injury to someone working

under the hood of the vehicle with a properly working hood pin installed. If Remote Start button is pressed with the

hood open, the lights will flash twice and the unit will not attempt a start. The system will abort Remote Start any

time the hood is opened. See Remote Start Diagnostics on page 13.

BRAKE PEDAL RESET:

Prevents starting or shuts off a remote started vehicle when this circuit is active. Prevents unauthorized driving of

vehicle. This circuit shuts the system down immediately when brake pedal is pressed. Turn the ignition key to the

“ON” position before the brake pedal is pressed.

OEM ALARM INTERFACE (May require optional Databus Module)

This feature is designed to Disarm and Re-arm Factory equipped security systems in conjunction with remote start

and keyless entry (if needed for your vehicle). This feature will maintain the original integrity and security of your

vehicle’s factory equipped systems before, during, or after remote start. Some vehicles require an optional Databus

module to operate a factory alarm or keyless entry.

LOCK with REMOTE START and After REMOTE START ABORT:

Option # 8 controls whether the system will automatically lock during and after a remote Start abort or time-out.

There are 4 choices for this option:

1. OFF

2. Lock with Remote Start Only - Default.

3. Lock with Remote Start and Lock with Remote Start Abort.

4. Lock with Remote Start Abort only.

NOTE: When changing, charging, or jumpstarting the vehicle’s battery we recommend removing the main power

fuses located on the heavy gauge RED wires near the remote start module.