User's Manual

9
MANUAL TRANSMISSION MODE (Option 11)
MANUAL TRANSMISSION EXIT PROCEDURE (Option #11-1 and 11-3)
This system features a Manual Transmission Mode. When exiting the vehicle, there is a safety check out
procedure required for the manual transmission mode to work. There are 2 choices of operation:
1. Option 11-1: With engine running and vehicle in neutral, set parking brake, then press “Idle Down” Icon or
remote start on transmitter. The remote starter will turn on and take over operation of the vehicle.
2. Option 11-3: With engine running and vehicle in neutral, set parking brake. The remote starter will turn on
and take over operation of the vehicle.
3. Remove key, exit vehicle (remote starter unit must “SEE” door opened, then closed with engine running).
4. Press the Remote Start Button after closing door to set up Manual Transmission Mode.
5. Option 8 can be used to program lock with remote start abort.
TURBO TIMER in Manual Transmission Mode:
For Turbo Timer, Press brake pedal before setting parking brake or pressing Remote Start button (requires Turbo
Timer Option # 22). The engine will remain running for the Turbo Timer setting (1, 3 or 5 minutes). Remote Start will
not work after turbo timer expires using a one button remote. To Remote Start after Turbo Timer requires a 3 or 4
button remote to lock the doors after exiting vehicle. The 3 or 4 button remotes can be added to the system along
with the 1 button remote. Consult your dealer.
CONVENIENCE AND SAFETY FEATURES
KEYLESS ENTRY (Power Door Locks, may require Data Module - Optional)
Option 23 Unlock on Start Button
The doors will automatically lock with remote start (Program option #8). This keeps your vehicle secure when it
is remote started. After the vehicle is remote started, the system can be programmed to remotely unlock the
doors with a momentary press of the start button (option #23). Vehicle stays remote started and doors unlock.
This is very convenient as many factory keyless entries don’t function with the ignition on.