Installation & Assembly

Assembly & Installation Instructions
CAUTION: Read instructions carefully and turn electricity off at main
circuit breaker oanel before beainnina installation.
***************************************************************************************************************************************************************
WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full
compliance with N.E.C. requirements. If there are any questions, contact a Qualified Electrical Contractor.
CAUTION - All glass is fragile, use care when handling Glass component(s) and or Lamp(s).
***************************************************************************************************************************************************************
POST MOUNTING & WIRE CONNECTION ASSEMBLY STEPS:
1. A------8
2. 0 (0.144)(3.6mm)----1III11111111111 ==-
3. B-----A
4. 0 (0.144)(3.6mm) _, SSSSSSSSSS>
5. D---- E-iii
6. C,A----8
(ACCESSORY)
7. F-----G
WHITE SUPPLY
WIRE
UL LISTED
WIRE NUTS
BLACK SUPPLY BLACK OR SMOOTH
WIRE Q FIXTURE WIRE
BARE COPPER OR BARE COPPER OR
GREEN GROUND GREEN FIXTURE
WIRE FROM SUPPLY GROUND WIRE
OR
~GREEN GROUND
GREE~,~~OUND l'lJ SCREW
WIRE
G
B&E
(NOT FURNISHED)
(NO INCLUIDA)
(NON FOURNIE)
(
)
'
/
"---
/
PAGE 1 of 2
A
♦
-c
D
E
B