Installation & Assembly

ASSEMBLY/INSTALLATION INSTRUCTIONS
1-LIGHT POST TOP
installation.
shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
referencing the illustrations on the installation instructions.
Phillips screwdriver.
1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the SCREWS.
2. Make wire connections with WIRE CONNECTORS:
A - Connect the black wire from Fixture to the black supply wire.
B - Connect the white wire from Fixture to the white supply wire.
3. Attach the FIXTURE onto POST using SCREW.
4. Install BULB(not included). See relamping label at socket area or packaging for maximum allowed wattage.
CAUTION
GENERAL
TOOLS REQUIRED
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
Please read carefully and save these instructions, as you may need them at a later date.
C - Connect the ground wire wire from Fixture to the ground wire supply wire.Carefully tuck wires
back into the POST.
5. Attach the COVER onto FIXTURE using SCREWS.