User Manual

1 2 3

4 5 6

7 8 9

ClicLoc System (1+2) for fast removal and reattachment: To

install the strap insert the clip - with the little nose pointing

away from the binocular - into the side attachment right next

to the ocular until you feel it positively click. The strap will

hold firmly. To remove the strap push the circular shaped

button or the ribbed release button. While pushing the but-

ton firmly pull the strap insert out of the attachment. The

same technique is used to remove the lens caps on many

models (3). Use the strap slider to fasten the caps when

removed from the lenses (4+5).

Without ClicLoc System (6-7): Place the binocular on a firm,

level surface with the two slits in the rubber armoring facing

you. Now thread one side of the strap through the buckle,

then through the top of the bin-

ocular body and out through the

bottom (8). Now loop the strap

upwards toward the buckle and

thread the loose end through the

back of the buckle (9).

Carrying Strap:

Your binocular is equipped with a carrying strap that might

vary between our different model series. Please refer to your

respective type similar to the images shown here:

Always keep the

rainguard attached

to the strap in order

to prevent losing it

by accident.

Important!

ENGLISH