Instructions / Assembly

ASSEMBLY INSTRUCTIONS

1. Before you start to assemble your tree, choose a location near a wall outlet.

Assemble the tree stand and place on a level surface.

2. Carefully insert the bottom section of the tree into the assembled stand.

Make sure the pole is firmly inserted into stand and screws tightened.

Then insert middle section into bottom section.

3. Allow branches to fall into place. When adjusting branches be sure that all wires are free of

branch hinges.

4. Connect the plug(s) labeled with letter A and B together and then plug on the wall outlet for

power supply and your entire tree should now be lit. If some bulbs do not light, search for any

loose plugs, broken, or missing bulbs. Keep tree plugged in while shaping your tree.

5. Begin to shape the branches working from the bottom to the top. Start with tips farthest from

the pole, one to the right, one to the left and one at the center of the main stem.

6. After shaping the whole tree following the previous steps, step back and take an

overall look at the tree. Shift branches to fill any gaps. Slightly upsweep all

branch tips for a uniform look. Your tree is now ready to be decorated and enjoyed.

Storage Instructions

1. Remove all ornaments and decorations.

2. Unplug each section of light sets between the tree top, middle section and bottom section.

3. Remove the tree top from the middle section, and remove the bottom section from the tree

stand.

4. Carefully replace the tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA

WHERE THE TEMPERATURE EXCEEDS 25 °C or 77 °F.

MADE IN CHINA

PAGE 1
ASSEMBLY INSTRUCTIONS 1. Before you start to assemble your tree, choose a location near a wall outlet. Assemble the tree stand and place on a level surface. 2. Carefully insert the bottom section of the tree into the assembled stand. Make sure the pole is firmly inserted into stand and screws tightened. Then insert middle section into bottom section. 3. Allow branches to fall into place. When adjusting branches be sure that all wires are free of branch hinges. 4.
PAGE 2
USE AND MAINTENANCE INSTRUCTIONS 1. Before using or reusing, please inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections or exposed copper wire. 2. If you find a section that does not light, starting with the first unlit bulbs, gently push (don’t twist) each bulb firmly into the socket.