User Manual

3 Operation
3.1 Operating Precautions
1. Before use, your amplifier must be configure for proper operation,
including input and output wiring hookup. Improper wiring can re-
sult in damage to equipment or potentially harm to the operator.
Consult section 2 for setup instructions.
2. Tampering with the circuitry, or making unauthorized changes is
not only dangerous but may also violate local regulations.
3. Use care when making connections between the amplifier and the
input or output equipment. Using equipment that is not capable of
handling the output wattage may lead to permanent damage.
NOTE: Stewart Audio will not be held responsible for
damage to your AV 25 or connected equipment if the
instructions in this manual are not followed.
3.2 Controls, Indicators, and Connectors
AV Series
AV-25-2
#2-SPKR-#1
MUTE PWR
LEVEL
21
ON CLIP SIG
#2 INPUT #1
PLENUM RATED
+ - + -
- + - +
- + - +
1
2
3
6
7
8
4
5
9
1
2
3
6
7
8
Speaker Output Connector
Remote Mute
Power Connector
Power Indicator LED
Clip Indicator LED
Signal Present Indicator LED
4
5
9
Channel 2 Level Knob
Channel 1 Level Knob
Input Connector
12 13