Instruction Manual
2 Setup
2.1 Setup Precautions
CAUTION: Before installing your amplier, make sure that
you have read the Important Safety Precautions at the be-
ginning of this manual.
2.2 Amplier Installation
The CVA Series incorporates a number of different mounting options in
order to t your installation needs.
2.2.1 Pole-Mount Installation
The CVA Series amplier casing has mount holes on both the top as
well as the side of the unit which can be used with the AV-Pole bracket
available from Stewart Audio. Two screws are included in the kit which
will afx the bracket to the top or side of the unit.
2.2.1 Universal-Mount Installation
The CVA Series also has a universal bracket available which allows the
unit to be mounted against a wall or under a table. Two screws are
included in the kit which will afx the bracket to the top or the side of
the unit. Once this is done, two holes are available for mounting the
unit where desired.
CAUTION: Use only the screws provided in mounting
brackets to the amplier. Do not overtighten.
CVA50-1 NET+
Part Number: AV-Pole