Owner manual

Safety Technology International, Inc.
2
306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
U
nit 49G Pipers Road • Park Farm Industrial Estate • Redditch
W
orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com
INSTALLATION OF STI 10115 IR TIMER SWITCH
All specifications and information shown were current as of publication, and are subject to change without notice.
10115 JAN2009
.69 in.
(18mm)
1.45 in.
(37mm)
.13 in.
(3mm)
.74 in.
RANGE ADJUST
C
W - FAR
CCW - NEAR
CONTACT HOLD TIME
CW - LONG
CCW - SHORT
+12 VDC - RED
GND - BLACK
DRY CONTACTS
N
.O. - GREEN
COM - BLUE
N.C. - WHITE
SPECIFICATIONS:
• Made of UV resistant polycarbonate.
• 0.75 in.(19mm) diameter panel mount
• Built-in self test on power up
Green light on for 1 sec. and no action from relay
Red light on to complete self test
• Dual color status LED
Red - standby
Green - active
• Special infrared encoder to avoid distraction from
other infrared.
• Adjustable latch time 0.5 ~ 20 seconds
• Adjustable proximity range 0.4 ~ 4 in. (1 ~ 10 cm)
• Operating voltage 12VDC+/-15%
• Power consumption:
Standby - 15mA
Active - 25mA
• Dry contact rating - 1 amp @ 24VDC
• Operating temperature -4°F ~ 158°F (-20°C ~ 70°C)
• Seal protection IP65
• Infrared life 100,000 hours
INFRARED SENDING
AND RECEIVING AREA
.92 in. DIAMETER
10115 IR TIMER SWITCH
WASHER
NUT
CABLE
Electronic warranty form at www.sti-usa.com/wc14