Instruction Manual

- 2 -
UL Listed Models Included on this Install Sheet
Indoor Use:
STI-1100 With horn for flush mounted appliances
STI-1100RC With horn for flush mounted appliances includes relay contacts capable of
operating from 9-24 VDC remote power or internal 9V battery power
STI-1130 With horn and 2” conduit spacer for surface mounted appliances and
electrical boxes
STI-1130RC Surface mounted version of the 1100RC includes 2” conduit spacer
STI-1200 Without horn for flush mounted appliances
STI-1230 Without horn, with 2” conduit spacer for surface mounted appliances and
electrical boxes
Specications
Polycarbonate Enclosure
· Flammability UL94 V-2
· Wall Thickness .095 inches
· NEMA Rating Meets NEMA 3R when mounted to smooth non-masonry surfaces
Testing Approvals
It has been tested and approved or listed by:
· Underwriter Laboratories and cUL No. 49G2
· Factory Mutual No. OG6A2.AY (STI-1100 and STI-1130 only)
· NEMA 3R when mounted to smooth non-masonry surfaces (only for Stopper II models
with backplate and gaskets)
· NYC BSA #947-81-5A
· IP 44 Rating (NEMA 3R)
· Obtain local fire marshal approval for State of California
· Operation is ADA Compliant
· UL/cUL Certified to meet ADA compliance
Patents
· United States No. 4267549, Canada No. 1147828Z
Indoor/Outdoor Use (Weather Stopper Models)
All outdoor units include necessary gaskets.
STI-1150 With horn for flush mounted appliances
STI-1150RC With horn for flush mounted appliances includes relay contacts capable of
operating from 9-24 VDC remote power or internal 9V battery power and
includes weather gasket
STI-1155 Surface mounted version of the STI-1150 includes 2” conduit spacer
STI-1155RC Surface mounted version of the STI-1150RC includes 2” conduit spacer
STI-1250 Without horn for flush mounted appliances
STI-3150 Without horn with 2” conduit spacer for surface mounted appliances and
electrical boxes
STI-1102 Replacement horn for cover with alarm
Custom-LBL Custom text message for horn housing
Gaskets
· Closed Cell IV2 with pressure sensitive adhesive
· Replace after 5 years
9V 12V 24V
· Low (95 dB @ 1 ft.) 96mA 107mA 125mA
· High (105 dB @ 1 ft.) 130mA 145mA 182mA
· Min. Operating Req. 2V @ 20mA 4V @ 20mA 4V @ 20mA
Horn
9V 12V 24V
· Relay 23mA 25mA 29mA
· Min. Activation Voltage 3.7V 5.8V 5.8V
· Reset Voltage 1.5V 3.3V 3.3V
· Dry Contact Rating <30V, 1A <30V, 1A <30V, 1A
(type Form “C”)
Relay