Use and Care Guide

Saves Energy and Reduces Your Electric Bills | Changing to a
Tempra
®
tankless system means there are no standby losses that
tank-type water heaters are subject to. This results in savings of
at least 15-20% in comparison with an electric tank water heater.
Unlimited Supply of Hot Water | Because a Tempra
®
heats
water only as it is used, and for as long as it is needed, there is
an endless supply of hot water. Nobody runs out of hot water in
the shower, even if the showers run extra-long.
Sleek Design Saves Space | A Tempra
®
from Stiebel Eltron
completely replaces a conventional tank heater, yet takes
up considerably less space, saving valuable living space and
providing endless hot water on demand.
Easy to Install | Large and bulky hot water tanks are usually
placed in a basement or utility room. Because the tank may
not be close to where hot water is used, there is a wait for hot
water. A Tempra’s compact design can be installed close to the
hot water taps. When this can be done, in new construction for
instance, the wait for hot water becomes as short as possible.
Even in a retrofit, where it might not be possible to place a
Tempra
®
closer to the hot water draw-off points, its considerably
smaller size has many advantages.
No Venting Required | Tempra
®
tankless water heaters are
electric and require no venting. This allows for more flexibility
when determining the best place for installation.
Seismic Proof Construction | Because a Tempra
®
is a tankless
water heater, it is not subject to seismic building code. There is
no need for the preventative construction required with a tank
water heater.
Maximum Output Temperature Limit | Tempra
®
tankless water
heaters can be set to limit the maximum hot water temperature
to 109 °F. This can be important in some installations to prevent
the possibility of scalding.
Self-Modulating Energy Savings | All Tempra
®
models include
self-modulating energy technology. Energy output is continually
and automatically adjusted to ensure that only the smallest
amount of electricity necessary is used to heat the water.
The Best: Electric Tankless Water Heating
Constant Temperature Output | Smart microprocessor
technology in a Tempra
®
allows setting the knob on the
front cover to the water temperature needed and getting
that temperature every time a hot water tap is opened. Our
exclusive Electronic Temperature Control ensures a steady
output temperature even if flow
rates vary up or down. Electric
tankless water heaters from other
manufacturers don’t maintain a
steady temperature if the flow
varies. A Tempra
®
always does.
Both Tempra
®
models have a convenient digital display, making
it easy to get hot water at the desired temperature from hand
washing temps of 68 °F (20 °C) to shower temps of 107 °F (42 °C),
and up to 140 °F (60 °C) for commercial applications.
New Models | Tempra
®
white models replace
the gray models, and have additional features.
The Tempra
®
Trend replaces the Tempra
®
and
has a digital display for accurate temperature
delivery and maximum energy efficiency.
The Tempra
®
Plus replaces the same named
previous model. It has an enhanced digital display with monitors
for cost savings and water flow, and two preset temperature
memory keys. The Tempra
®
Plus continues to have Stiebel
Eltron’s industry-exclusive Advanced Flow Control
™
.
Tempra
®
is manufactured by Stiebel Eltron, a pioneer and leader in tankless water heating technology since
1924. Advanced technology, impressive energy-saving performance, and a compact design are only a few of the
reasons to consider a Tempra
®
tankless water heater.
Variable Flow
Steady Temperature