Owner's Manual
•
••
•
Wear work gloves to protect hands.
•
••
•
Fit the chain - start at the bar nose -
pay attention to position of tensio-
ning gear and the cutting edges.
•
••
•
Turn tensioning gear (9) clockwise
up to the stop.
•
••
•
Disengage the chain brake:
Pull hand guard (10) toward the
front handle.
•
••
•
Turn the guide bar so that the
tensioning gear is facing you.
•
••
•
Fit the chain over the
sprocket (11) and slip the guide bar
over the stud (12) - the head of the
rear collar stud must locate in the
slot.
•
••
•
Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise up to the stop.
9
135BA008 KN
10
135BA009 KN
11
12
135BA010 KN
135BA011 KN
017, 018 27