Owner's Manual

All versions
•
••
•
Observe safety precautions -
see section “Safety Precautions”.
Push hand guard forward (1):
The chain is now locked.
•
••
•
Press down the interlock lever (2)
and squeeze the throttle trigger at
the same time and set the Master
Control lever to:
For cold start l
For warm start n
(even if engine has been running
but is still cold)
•
••
•
Place your saw on the ground -
make sure you have a firm footing -
check that chain is not touching any
object or the ground -
bystanders must be well clear of
general work area of the saw -
•
••
•
Hold the saw firmly on the ground
with your left hand on the
front handle -
your thumb should be under
the handle.
•
••
•
Put your right foot into the rear
handle and press down.
Alternative method of starting:
•
••
•
Hold the rear handle tightly
between your legs, just above the
knees.
•
••
•
Grip the front handle firmly with
your left hand -
your thumb should be under the
handle.
2
1
0
STOP
143BA017 KN
143BA018 KN
143BA019 KN
34 017, 018