Owner's Manual
At very low outside temperatures:
Allow engine to warm up
As soon as the engine runs:
•
••
•
Blip the throttle trigger
to disengage it from starting throttle
position -
Master Control lever will move
to normal operating position -
engine settles down to idling speed.
•
••
•
Disengage chain brake: Pull hand
guard toward front handle -
as shown in illustration -
•
••
•
Open throttle slightly -
warm up engine for short period.
If engine doesn’t start:
If you did not move the Master Control
lever to the “warm start” position n
quickly enough after the engine began to
fire,
the combustion chamber is flooded.
•
••
•
Press down the interlock lever and
set the Master Control lever to
“cold start”
•
••
•
Turn the twist lock above the rear
handle 90° counterclockwise and lift
off the shroud vertically.
•
••
•
Pull off the spark plug boot.
•
••
•
Unscrew and dry off the spark plug.
•
••
•
Set the Master Control lever to b
•
••
•
Crank the engine several times with
the starter to clear the combustion
chamber.
•
••
•
Refit the spark plug and connect
the spark plug boot -
reassemble all other parts
•
••
•
Set Master Control lever to
“warm start” even if engine is cold.
•
••
•
Now start the engine.
Fuel tank run until dry and then refueled
•
••
•
Pull starter rope several times
until fuel line is primed.
143BA022 KN
143BA043 LÄ
36 017, 018