Operation Manual

14
english / USA
BG 45
To stop the engine:
: Move switch to position O
Additional hints on starting
- If the engine does not start:
: Make sure all settings are correct
(choke shutter, throttle trigger
in starting throttle position, stop
switch to I)
: Repeat the starting procedure
- If the engine still does not start:
: Move switch to O
: Pull off the spark plug boot (7).
: Unscrew and dry off the spark plug.
: Open throttle wide.
: Crank the engine several times with
the starter to clear the combustion
chamber.
: Refit the spark plug and connect the
spark plug boot - push it down firmly.
: Move switch to I
: Set choke lever to e -
even if the engine is cold.
: Now start the engine.
Fuel tank run until dry and then
refueled
: Press the fuel pump bulb (6) at least
five times - bulb must be filled with
fuel.
: Now start the engine.
Your blower is designed for one-handed
operation. It can be carried by the
control handle in either the right or left
hand.
The nozzles supplied enable you to
carry out a wide variety of clean-up jobs.
The round nozzle* is particularly suitable
for use on uneven surfaces (e.g. fields
and lawns).
The fan nozzle* produces a broad and
powerful airstream at ground level. It can
be aimed and controlled very accurately.
This nozzle is highly effective for blow-
sweeping sawdust, leaves, grass
cuttings, etc. on flat surfaces.
* see chapter “Key to Symbols“
7
295BA017 KN
6
295BA018 KN
Using the Blower
326BA033 LA