Operation Manual

28
English / USA
BG 55, BG 65, BG 85, SH 55, SH 85
Definitions
1. Tab.
Designed to secure the blower tube
to the machine.
2. Setting Lever.
To position the throttle trigger.
3. Spark Plug Boot.
Connects the spark plug to the
ignition wire.
4. Muffler.
Attenuates exhaust noises and
diverts exhaust gases away from
operator.
5. Starter Grip.
The grip of the pull starter, which is
the device to start the engine.
6. Carburetor Adjusting Screws.
For tuning carburetor.
7. Choke Lever.
Eases engine starting by enriching
mixture.
8. Fuel Pump.
Provides additional fuel feed for a
cold start.
9. Filter Housing.
Covers the air filter element.
10. Fuel Filler Cap.
For closing the fuel tank.
11. Fuel Tank.
For fuel and oil mixture.
12. Assist Handle.
Additional handle for use with the
suction tube as a vacuum and held
by the left hand.
13. Control Handle.
The handle of the blower held by the
right hand.
14. Switch.
Run and stop switch.
15. Throttle Trigger.
Controls the speed of the engine.
16. Intake Screen.
Reduces the risk of direct contact
with the fan.
17. Blower Tube.
Directs airstream.
18. Round Nozzle.
To be mounted on the blower tube to
aim the air stream.
19. Fan Nozzle.
Alternative nozzle for the blower
tube to accelerate the air stream.
Additional parts for vacuum
cleaning purposes
20. Suction Tube.
To be mounted on the blower.
21. Elbow.
To direct the air stream and debris
into the collection bag.
22. Catcher Bag.
To be mounted on the elbow to
collect the vacuumed debris.