Instruction Manual

Condition LEDs on Bat‐
tery
Cause Remedy
1 LED glows
red.
Battery too hot or too
cold.
► Pull the connecting cable plug out of the
socket.
► Allow battery to cool down / warm up.
3 LEDs flash
red.
There is a malfunction
in the blower.
► Pull connecting cable plug out of the
socket and then refit it.
► Switch on the blower.
► If 3 LEDs continue to flash red: Do not
use the blower and contact your STIHL
servicing dealer for assistance.
3 LEDs glow
red.
Blower too hot. ► Pull the connecting cable plug out of the
socket.
► Allow blower to cool down.
4 LEDs flash
red
There is a malfunction
in the battery.
► Pull connecting cable plug out of the
socket and then refit it.
► Switch on the blower.
► If 4 LEDs continue to flash red: Do not
use the battery and contact your STIHL
dealer for assistance.
No electrical contact
between blower and
battery.
► Pull connecting cable plug out of the
socket and then refit it.
► If blower still does not start when swit‐
ched on: Clean contacts of connecting
cable as described in the STIHL AR bat‐
tery’s instruction manual or in the user
instructions for the “AP belt bag with
connecting cable”.
Blower or battery
damp.
► Allow blower or battery to dry.
Blower cuts out
during operation
3 LEDs glow
red.
Blower too hot. ► Pull the connecting cable plug out of the
socket.
► Allow blower to cool down.
There is a electrical
malfunction.
► Pull connecting cable plug out of the
socket and then refit it.
► If blower continues to cut out during ope‐
ration: Clean contacts of connecting
cable as described in the STIHL AR bat‐
tery’s instruction manual or in the user
instructions for the “AP belt bag with
connecting cable”.
► Switch on the blower.
Blower runtime is
too short
Battery not fully char‐
ged.
► Recharge the battery fully as described
in the instruction manual for the STIHL
AL 101, 300, 500 chargers.
Normal battery life
has been exceeded.
► Replace the battery.
18 Specifications
18.1 STIHL BGA 100 Blower
Approved batteries:
•
STIHL AR
•
STIHL AP together with “AP belt bag with
connecting cable”
–
Air speed with nozzle mounted: 63 m/s
–
Weight: 2.5 kg
For battery life see www.stihl.com/battery-life.
18.2 Noise and Vibration Data
K-value for sound pressure level is 2 dB(A). K-
value for sound power level is 2 dB(A). K-value
for vibration level is 2 m/s².
STIHL recommends that you wear hearing pro‐
tection.
–
Sound pressure level L
pA
measured according
to EN 50636‑2‑100: 80 dB(A)
–
Sound power level L
wA
measured according to
EN 50636-2-100: 90 dB(A)
English 18 Specifications
26 0458-711-9821-C