Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 Charger Safety
- 7 Maintenance, Repair and Storage
- 8 General Warnings and Instructions
- 9 Before Starting Work
- 10 Charging the Blower
- 11 LED Diagnostics
- 12 Assembling the Blower
- 13 Inserting and Removing the Activation Key
- 14 Switching the Blower On and Off
- 15 Checking the Controls
- 16 During Operation
- 17 After Finishing Work
- 18 Transporting the Blower
- 19 Storing the Blower and Charger
- 20 Cleaning
- 21 Inspection and Maintenance
- 22 Troubleshooting Guide
- 23 Specifications
- 24 Replacement Parts and Equipment
- 25 Disposal
- 26 Limited Warranty
- 27 Trademarks
- 28 Addresses
- 1 Introducción
- 2 Acerca de este manual de instrucciones
- 3 Componentes importantes
- 4 Símbolos de seguridad en los productos
- 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 6 Seguridad del cargador
- 7 Mantenimiento, reparación y almacenamiento
- 8 Advertencias e instrucciones generales
- 9 Antes de empezar a trabajar
- 10 Carga del soplador
- 11 Diagnóstico de LED
- 12 Armado del soplador
- 13 Inserción y retiro de la llave de activación
- 14 Encendido y apagado del soplador
- 15 Revisión de los controles
- 16 Durante el funcionamiento
- 17 Después de completar el trabajo
- 18 Transporte del soplador
- 19 Almacenamiento del soplador y el cargador
- 20 Limpieza
- 21 Inspección y mantenimiento
- 22 Guía de solución de problemas
- 23 Especificaciones
- 24 Piezas y equipos de repuesto
- 25 Eliminación
- 26 Garantía limitada
- 27 Marcas comerciales
- 28 Direcciones
0458-719-8621-A
9
English
5 IMPORTANT SAFETY INSTRUCTIONS
■ A battery fire can be dangerous. To reduce the risk of
severe personal injury and property damage in the event
of fire:
– Evacuate the area. Fire can spread rapidly. Stay
clear of any vapors generated and maintain a safe
distance.
– Contact the fire department.
– Although water can be used to put out a battery fire,
use of a multi-purpose dry chemical fire extinguisher
is preferable.
– Consult the fire department regarding proper
disposal of the burned battery.
5.7 Using the Blower
5.7.1 Before Operation
WARNING
■ Misuse or unauthorized use may result in personal injury
and property damage.
– Use the blower only as described in this instruction
manual.
■ Using a blower that is modified, damaged, improperly
adjusted or maintained, or not completely and securely
assembled can lead to a malfunction and increase the risk
of serious personal injury.
– Never operate a blower that is modified, damaged,
improperly maintained or not completely and
securely assembled.
– Always check your blower for proper condition and
operation before starting work, particularly the
retaining latch, trigger switch lockout and trigger
switch.
– Ensure that the retaining latch, trigger switch lockout
and trigger switch move freely and always spring
back to the stop position when released. The trigger
switch must not engage until the retaining latch is
unlocked and the trigger switch lockout is
depressed.
– Never attempt to modify or override the controls or
safety devices in any way.
– If your blower or any part is damaged or does not
function properly, take it to your authorized STIHL
servicing dealer. Do not use the blower until the
problem has been corrected.
■ Before inserting the activation key:
– Check the electrical contacts of the activation key
and activation key socket for corrosion or other
foreign matter. Keep clean.
– Never insert a damaged, deformed or corroded
activation key.
– Read and follow the instructions on switching on the
blower, @ 14.1.
■ To help reduce the risk of serious personal injury from
unintentional starting:
– Be sure the retaining latch is in the locked position
and the trigger switch is in the off position before
inserting the activation key.
– Never carry the blower with your finger on the trigger
switch.
– Release the trigger switch before removing the
activation key.
– Never leave the blower unattended when the
activation key is inserted.
– Never store the activation key in the blower.
– Remove the activation key before
assembling, transporting, adjusting,
inspecting, cleaning, servicing,
maintaining or storing the blower and
any other time it is not in use.