Operation Manual

0458-712-9621-B
32
English 4 Safety Precautions
WARNING
￭ If the product does not comply with safety requirements,
components will no longer function properly or safety
devices may be rendered inoperative. This can result in
serious or fatal injuries.
► Do not use a damaged charger.
► If the charger is dirty or wet: Clean the charger and allow
it to dry.
► Never attempt to modify the charger.
► Never insert objects in the charger’s openings.
►Never bridge the charger's contacts with
metallic objects (short circuit).
► Do not open the charger.
4.7 Operation
WARNING
￭ The user cannot concentrate on the work in certain
situations. The user may trip, fall and be seriously injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not work with the
blower.
► Operate the blower alone.
► Do not work above shoulder height.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance. If it is necessary to work at heights: Use a lift
bucket or a safe platform.
► Blow sweep with the wind.
￭ Objects can be thrown at high speed during operation.
Bystanders and animals may be injured and damage to
property may occur.
► Do not direct the air blast towards bystanders, animals
or objects.
￭ If the behavior of the blower changes during operation or
feels unusual, it may no longer be in a safe condition. This
can result in serious injuries and damage to property.
► Stop work, remove the battery and contact your STIHL
servicing dealer.
￭ Blower vibrations may occur during operation.
► Wear gloves.
► Take regular breaks.
► If signs of circulation problems occur: Seek medical
advice.
4.8 Charging
WARNING
Contact with live parts can occur for the following reasons:
– The connecting cord is damaged.
– The mains plug is damaged.
– The socket is not properly installed.
￭ Contact with live parts can result in electric shock. The
user may be seriously injured or killed.
► Make sure that the connecting cord and mains plug are
undamaged.
► Plug the mains plug into a correctly installed socket.