Operation Manual

BR 450, BR 450 C
English
12
Mounting the Control Handle
N Push the control handle (1) onto the
mount (2) .
N Insert and tighten down the
screws (3).
N Engage the throttle cable (4) with
sleeve (5) in the hose clamp (6).
Adjusting the control handle
N Open the clamping lever (3).
N Move the control handle (1) along
the blower tube (2) to the most
comfortable position.
N Close the clamping lever (3).
Adjusting the Blower Tube
N Loosen the union nut (1).
N Pull the blower tube (1) out to the
required length.
N Tighten the union nut (1).
Wear Mark on Nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Transport Aid
When storing or transporting the
machine:
N Secure the blower tube to the
handle on the backplate with the
hook and loop fastener.
1
3
2
0000-GXX-2045-A0
4
6
5
0416BA008 KN
0416BA007 KN
1
2
3
1
0416BA015 KN
2
0416BA009 KN