Instruction Manual

BR 700
English
8
Mounting the Nozzle
N Push the nozzle (1) onto the blower
tube (2) and engage it on the
lugs (3).
Removing the Nozzle
N Rotate the nozzle (1) in the direction
of the arrow until the lugs (3) are
covered.
N Pull the nozzle (1) off the blower
tube (2).
Adjusting the Control Handle
N Open the clamping lever (3).
N Move the control handle (1) along
the blower tube (2) to the most
comfortable position.
N Close the clamping lever (3).
N Engage the throttle cable (4) with
sleeve (5) in the retainer (6).
Adjusting the Blower Tube
N Loosen the union nut (1).
N Pull the blower tube (1) out to the
required length.
N Tighten the union nut (1).
Wear Mark on Nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Transport Aid
When storing or transporting the
machine:
3
0416BA005 KN
1
2
1
3
0416BA006 KN
2
0416BA007 KN
1
2
3
4
6
5
0416BA008 KN
1
0416BA015 KN
2
0416BA009 KN