Instruction Manual

BR 700
English
9
N Secure the blower tube to the
handle on the backplate with the
hook and loop fastener.
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N Set throttle trigger to the full throttle
position – as far as stop.
N Carefully screw home the screw in
the throttle trigger until you feel
initial resistance.
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
machine is completely and properly
assembled.
N Move the throttle trigger to the full
throttle position.
N Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
Adjusting the Throttle Cable
002BA655 KN