Instruction Manual

BR 700
English
13
Positions of Master Control Lever
1 Setting lever
2 Throttle trigger
Engine stop 0 – ignition interrupted,
engine stops. The setting lever does not
remain in ths position, it springs back.
Normal run position F – engine runs or is
ready to start. Throttle trigger can be
moved to any position.
Infinitely variable throttle setting –
throttle trigger can be locked in any
required position: Move setting lever (1)
upwards until required engine speed is
reached. To disengage, move the
setting lever back to the normal run
position F.
Starting the Engine
N Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
N Move the setting lever to F
N Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
Cold engine (cold start)
N Turn the choke knob to l.
Warm engine (warm start)
N Turn the choke knob to n.
Also use this setting if the engine has
been running but is still cold.
Information Before You Start
2
1
0416BA010 KN
0416BA013 KN
2
1
Starting / Stopping the
Engine
0416BA011 KN
452BA115 KN