Instruction Manual

BR 700
English
15
N Move the setting lever (1) to the full
throttle position.
N Continue cranking until the engine
runs.
Throttle Cable Adjustment
N Check adjustment of throttle cable –
see chapter on "Adjusting the
Throttle Cable".
If fuel tank has been run completely dry
and then refueled
N After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is already filled with
fuel.
N Set the choke knob according to
engine temperature.
N Now start the engine.
During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
N Turn the choke knob to l.
N Loosen the screws (1).
N Remove the filter cover (2).
0416BA013 KN
2
1
Operating Instructions Replacing the Air Filter