Instruction Manual

BR 700
English
22
Definitions
1. Straight Nozzle
Aims and widens the airstream.
2. Blower Tube
Directs the airstream.
3. Union Nut
Allows simple adjustment of blower
tube length.
4. Throttle Trigger
Controls the speed of the engine.
5. Setting Lever
For run and stop. Sets the throttle to
various positions or stops the
engine.
6. Control Handle
Handle on the flexible hose to hold
and direct the tube in the required
direction. Designed to help protect
against static electricity.
7. Quick-Release Clamp
For adjusting the position of the
Control Handle.
8. Pleated Hose
For blowing in the desired direction.
9. Harness
For carrying the unit.
10. Backplate
Helps protect the back of the user.
11. Intake Screen
Helps prevent leaves entering
intake.
12. Air Filter Cover
Covers and protects the air filter
element.
13. Fuel Filler Cap
For closing the fuel tank.
14. Spark Plug Boot
Connects the spark plug with the
ignition lead.
15. Muffler (with Spark Arresting
Screen)
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
16. Carburetor Adjusting Screws
For tuning the carburetor.
17. Choke Knob
Eases engine starting by enriching
mixture.
18. Manual Fuel Pump
Provides additional fuel feed for a
cold start.
19. Starter Grip
The grip of the pull starter, for
starting the engine.
20. Fuel Tank
For fuel and oil mixture.
21. Spacer
Designed to reduce the risk of burns
and fire.
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
STIHL 4-MIX Engine
Ignition System
Electronic magneto ignition
This ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Specifications
A = 300 hours
B = 125 hours
C= 50hours
Displacement: 64.8 cc
Bore: 50 mm
Stroke: 33 mm
Idle speed: 2,500 rpm
Spark plug (resistor
type):
NGK CMR 6 H,
BOSCH USR 4AC
Electrode gap: 0.5 mm