Operation Manual

17BR 420
English / USA
: Put the unit on the ground. Check
that bystanders are well clear of the
general work area and the nozzle.
: Make sure you have a firm footing:
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
: Pull the starter grip slowly with your
right hand until you feel it engage
and give it a brisk strong pull. Do not
pull the starter rope out all the way
as it might otherwise break.
: Do not let the starter grip snap back.
: Guide it slowly back into the housing
so that the starter rope can rewind
properly.
When engine begins to fire:
: If engine is cold:
Turn choke knob to e and continue
cranking until engine runs.
: If engine is warm:
Continue cranking until engine runs.
373BA012 KN
373BA013 KN