Instruction Manual

FS 360 C-M, FS 410 C-M, FS 460 C-M, FS 490 C-M
English
41
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts X
Control handle Check operation XX
Air filter, paper filter
Visual inspection XX
Replace
1)
X
Air filter, synthetic fabric filter
Visual inspection XX
Clean X
Replace XX
Fuel tank Clean X
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
2)
X
Pickup body (filter) in fuel tank
Check
2)
X
Replace
2)
XXX
Engine idle speed
Check – the cutting attachment must not
turn
XX
If the cutting attachment turns when the
engine is idling, have machine repaired
by servicing dealer
2)
X
Spark plug
Readjust electrode gap X
Replace after every 100 operating hours
Cooling inlets
Visual inspection X
Clean X
Cylinder fins Clean
2)
X