Operation Manual

10
English / USA
SG 20
: Connect the wand (1) to the spray
gun (2).
: Secure the nozzle holder (3) to the
wand (1).
: Use the screws (5) to mount the
hand lever (4).
After completing assembly, do a test
run with clean water to check the
sprayer for leaks – do not use the
sprayer if it is leaking.
: Adjust the harness straps so that
the backplate fits snugly and
securely against your back.
Threading the Harness Straps
Assembling the Sprayer Harness