Operation Manual

11SG 20
English / USA
Tightening the Harness
: Pull the ends of the straps
downward.
Loosening the Harness
: Lift tabs of sliding adjusters.
: Fit the strainer (1).
: Stand the sprayer on a level
surface.
: Fill up with thoroughly blended
mixture – do not overfill (no further
than max. mark – arrow).
: Gasket (2) in the cap (3) must
always be well lubricated with
grease.
: Fit the cap and tighten it down firmly.
373BA003 KN
373BA004 KN
Filling the Container