Instructions / Assembly

8 - English
PREPARING YOUR CEILING FAN FOR
MOUNTING
 Loosen the screw securing the pivot ball to the downrod.
Slide the pivot ball down and off the downrod and set
aside.
 Remove the retainer pin from the downrod.
 Remove the screw and star washer securing the ground
wire terminal to the downrod. Remove the wire and set
aside.
INSTALLATION
 Loosen (but do not remove) the lock screws securing the
downrod to the mounting collar on the fan assembly, then
remove the hitch pin and the clevis pin from the mounting
collar. Carefully feed the fan’s electrical wiring up through
the threaded end of the downrod.
PIVOT BALL
DOWNROD
DOWNROD
STAR WASHER
SCREW
GROUND WIRE
TERMINAL
RETAINER PIN
SCREW
CLEVIS PIN
MOUNTING COLLAR
DOWNROD
HITCH PIN
LOCK SCREW
DOWNROD
HOLE
HOLE
LOCK SCREW