Datasheet
Table Of Contents
- Table 1. Main characteristics
- Table 2. Device summary
- 1 Characteristics
- Table 3. Absolute maximum ratings (Tj = 25 °C unless otherwise stated)
- Table 4. Electrical characteristics (Tj = 25 °C, unless otherwise stated)
- Table 5. Static characteristics
- Table 6. Thermal resistance
- Figure 1. Maximum power dissipation versus RMS on-state current (full cycle)
- Figure 2. RMS on-state current versus case temperature (full cycle)
- Figure 3. RMS on-state current versus ambient temperature (printed circuit board FR4, copper thickness: 35µm) (full cycle)
- Figure 4. Relative variation of thermal impedance versus pulse duration
- Figure 5. On-state characteristics (maximum values)
- Figure 6. Surge peak on-state current versus number of cycles
- Figure 7. Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t
- Figure 8. Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values)
- Figure 9. Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values)
- Figure 10. Relative variation of critical rate of decrease of main current versus junction temperature
- Figure 11. DPAK thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 µm)
- 2 Package information
- Figure 12. DPAK dimension definitions
- Table 7. DPAK dimension values
- Figure 13. Footprint (dimensions in mm)
- Figure 14. ISOWATT220AB dimension definitions
- Table 8. ISOWATT220AB dimension values
- Figure 15. IPAK dimension definitions
- Table 9. IPAK dimension values
- Figure 16. TO-220AB (NIns. & Ins. 20-up) dimension definitions
- Table 10. TO-220AB (NIns. & Ins. 20-up) dimension values
- 3 Ordering information
- 4 Revision history
Ordering information T4 series
14/17 DocID7699 Rev 5
3 Ordering information
Figure 17. Order information scheme
Blank = Unavailable
Table 11. Product selector
Part Number
Voltage (xxx)
Sensitivity Type Package
600 V 700 V 800 V
T405-xxxB X X X 5 mA Logic level DPAK
T405-xxxB-TR X X X 5 mA Logic level DPAK
T405-xxxH X X 5 mA Logic level IPAK
T405-xxxT X 5 mA Logic level TO-220AB
T405-xxxW X 5 mA Logic level ISOWATT220AB
T410-xxxB X X 10 mA Logic Level DPAK
T410-xxxB-TR X X 10 mA Logic Level DPAK
T410-xxxH X X 10 mA Logic Level IPAK
T410-xxxT X X X 10 mA Logic Level TO-220AB
T410-xxxW X 10 mA Logic Level ISOWATT220AB
T435-xxxB X X X 35 mA Snubberless DPAK
T435-xxxB-TR X X X 35 mA Snubberless DPAK
T435-xxxH X X 35 mA Snubberless IPAK
T435-xxxT X X 35 mA Snubberless TO-220AB
T435-xxxW X X 35 mA Snubberless ISOWATT220AB
T 4 05 - 600 B (-TR)
Triac series
Current
Sensitivity
Voltage
Package
Packing mode
4 = 4A
05 = 5mA
10 = 10mA
35 = 35mA
600 = 600V
700 = 700V
800 = 800V
B = DPAK
H = IPAK
T = TO-220AB
W = ISOWATT220AB
Blank = Tube
-TR = Tape & reel