Warranty
Revision082515
4
ADJUSTING YOUR LIGHT HEADS
Your light heads can be adjusted by turning the individual light head to desired position. You can also adjust your light head up
and down to your desired position.
TROUBLE SHOOTING
Problem
Possible Cause
Possible Correction
Light does not come on
1. No power to the fixture
2. Fixture is sensing too much
light
1. Confirm wall switch is on
2. Cover photocell, unit should
come on. Unit may need to be
relocated.
Light goes on and off continuously
1. Light is sensing reflection
1. Relocate light to area where it
cannot sense reflections.
Light stays on
1. Area is too shaded
1. Shine a light into the photo
cell, if the light turns off
relocate light to less shaded
area.
PRODUCT MAINTENANCE
To clean the surface of the light, use mild soap and water. Do not use scouring pads, powders, steel wool or any other abrasive
materials.
For any further questions please contact us at 303.652.6164 Monday through Friday 7am to 4pm Mountain Standard Time.
PRODUCT WARRANTY
Keystone Group will cover any manufacturing defect for a period of three (3) years from the date of purchase with original proof of purchase.
Keystone Group will either repair or replace your product at our discretion. The warranty is not transferable and is only valid to the original
purchaser. This warranty does not apply to the following; acts of God, product that has been modified, opened, disassembled or unauthorized
repair, products not used in accordance with the provided instructions, damages caused by shipping, improper handling, accident or misuse.
The finish of any part of the product, scratches, weathering, corrosion, discoloration, fading, these are all considered normal wear and tear.
This warranty does not cover any damages of merchandise in transit, any damages need to be reported to the carrier and a claim needs to be
filed with the carrier.
a Keystone Group product