User Guide

SS
SS
S
tep 4tep 4
tep 4tep 4
tep 4
RR
RR
R
emoemo
emoemo
emo
vv
vv
v
e De D
e De D
e D
ust Sust S
ust Sust S
ust S
hield, and Ihield, and I
hield, and Ihield, and I
hield, and I
nstall Cnstall C
nstall Cnstall C
nstall C
aliper Baliper B
aliper Baliper B
aliper B
racketracket
racketracket
racket
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 [phone]
www.stoptech.com 12
The dust shield must be permanently removed
from each front wheel, to accommodate the
AeroRotors.
Remove the rivets which hold the dust shield in
place, by either drilling out their centers, or by
chiseling them off. Then slide the dust shield
off of the hub.
Install the caliper bracket, using the supplied
caliper mounting bolts, and torque them to
5555
5555
55
lb-ftlb-ft
lb-ftlb-ft
lb-ft, using a 17mm socket.
Remove the Jet nuts and washers from the cali-
per mounting bracket, and put them in a safe
place for later use.
Apply a few drops of the supplied Loctite 262 to
the end of the threads of the supplied caliper
mounting bolts.