User Guide

Install the caliper onto the adapter bracket, ori-

enting it so that the bleed screws are positioned

on the top side of the caliper.

Slide the brake pads into position within the

caliper, taking care to ensure that the friction

side of each pad is facing the rotor.

tep 6 (Conttep 6 (Cont

tep 6 (Cont

’’

’

d.)d.)

d.)

nstall Cnstall C

nstall C

aliper and Paliper and P

aliper and P

adsads

ads

3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799

www.stoptech.com 18

(Y(Y

es, thees, the

es, the

y havy hav

y hav

e been installed backware been installed backwar

e been installed backwar

d be-d be-

d be-

fore!)fore!)

fore!)

Take care to ensure that the caliper is square and

evenly started on both studs. It may be neces-

sary to use a mallet to gently tap the caliper into

position.

Install the Jet nuts onto each stud, with one

12mm washer under each nut. Tighten the Jet

nuts to

40 lb-ft 40 lb-ft

40 lb-ft of torque, using a 1/2” socket.