User Guide

ools and Eools and E

ools and E

quipment Rquipment R

quipment R

equirequir

equir

eded

Different models and years of vehicle use different-sized fasteners, and every effort has been taken

to correctly identify the proper sized tool for each step of the installation. Occasionally, however,

manufacturers may use an alternate fastener, so it’s advisable to check that each tool correctly fits

the fastener before loosening or tightening it. The following tools and equipment will be needed:

17mm socket

17mm wrench

15mm wrench or socket (1/2” drive suggested)

14mm wrench or socket (in some cases, 9/16” may be required)

13mm flare wrench

11mm box wrench (in addition, an 11mm flare wrench is also recommended)

10mm wrench or socket

1/2” socket wrench (3/8” drive suggested)

5mm Allen (hex) wrench

Needle-nose pliers, or a flat-blade screwdriver

Diagonal cutters

Power drill, or chisel and hammer

Safety glasses and work gloves for the metal drilling/chiseling process

Torque wrenches capable of 10-85 lb-ft settings

Small drip tray or several rags

Small funnel or suitable means of filling master cylinder reservoir

Anti-seize compound

Brake bleed bottle

1 pair of jack stands or other means of supporting vehicle

Plastic or non-marring mallet

DOT 3 or 4 Brake Fluid. Check manufacturer’s recommendation for compatibility. StopTech

recommends flushing brake fluid every one-to-two years, or more often under severe usage condi-

tions. If not done recently, the installation of a brake kit is an excellent opportunity to refresh your

brake fluid, or to upgrade to a higher-performance fluid, such as Motul 600.

Lincoln LS FLincoln LS F

Lincoln LS F

ont Axle Kont Axle K

ont Axle K

it (Contit (Cont

it (Cont

’’

’

d)d)

3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799