Owner manual

6 Installation
StorCase Technology, Inc. InfoStation 12-Bay Installation Guide - Rev. A02
Installing the Power Cord Retainer Clip
CAUTION: The power supply/blower module contains NO USER SERVICEABLE PARTS
inside the unit. Warranty is VOID if module is opened. Refer ALL servicing
to qualified service personnel!
This unit has more than one power supply cord. Disconnect two power supply
cords before servicing to avoid electric shock.
1. Turn OFF power to the power supply/blower module via the power switch located
on the module itself. If plugged in, unplug the power cord from the module.
2. Squeeze the retainer clip (Figure 5) and install onto the power supply/blower module
(Step 1 of Figure 6).
3. Flip the retainer clip up and plug in the power cord.
4. Once cord is plugged in, push down the retainer clip so that it locks onto the power
cord (Step 2 of Figure 6).
Figure 5: Power Cord Retainer Clip
IF14_23