User Manual

InfoStation 14-Bay U320 Installation Guide - Rev. B00 StorCase Technology, Inc.
Installation 9
Figure 7: Removing the Option Cover Plate
Removing the Option Cover Plate
NOTES: A #2 Phillips screwdriver will be required for this procedure.
Blank plate (provided) must be installed if module slot is left empty. Installation
of the blank plate is necessary for proper cooling inside chassis.
1. Remove the Phillips F. H. screw securing the cover plate to the InfoStation chassis
(Figure 7).
4. Remove the cover plate (Figure 7).
5. To reinstall cover plate, simply reverse the above mentioned steps.
Screw
Cover
Plate